The fire resisting sliding doors are perfectly applicable for fire compartmentation. Due to the limited space needed above the sliding doors, they are applied a lot in indoor situations with fire protection requirements.
Indoor fireproof closure of large halls and industrial buildings, fire and hazardous areas, office buildings and shopping malls.
Tested in accordance with NEN-EN 1634-1 Certification EI₂ 60 and EI₂ 120 minutes
The 92 mm thick door leaf consists of a massive fire resistant core, on both sides carried out with a flat sendzimir galvanized plating. The wall sealing is done by means of labyrinth profiles and intumescent strips. The weight of the door leaf is approximately 50 kg / m².
By means of overdimensioned carriages hung on a galvanized steel tube rail. Because of steel low-friction carriages and guides, the door is easy to operate. To protect the pipe rail, the door is delivered with a rail cover by default. The door can be delivered in either a left or right sliding version or is deliverable in a 2-leaf version.
The door leaf is finished in RAL 7035 by default. Other materials are finished in galvanized steel.
The sliding door is held open by a 24 volt electromagnet and closes mechanically by means of a counterweight. Manual operation is possible by means of the integrated handle.
The sliding door is certified with a pass door inside the door leaf. The pass door is carried out with standard door fittings and a Dorma door closer. Optionally, the door can be carried out with anti-panic fittings and push bar.
Width up to 16 meter, height up to 4.5 meter. Door leaf thickness is 92 mm.
Door leaf weight is approx. 50 kg per m².